Home security tools

Home network security

See what’s connected. Understand what changed.

A fuller HomeControl security overview: device alerts, network signals, exposure checks you start yourself and practical next steps for your home network.

The home security tools work on a supported Brume 2 with the FamilyAtlas plug-in and your phone. Some depend on your router, phone and setup, and each check starts only when a parent confirms it.

How to read itSignals, not verdicts.

Alerts point to something worth a look. They are not a diagnosis, and no screen tells you your home is safe or hacked.

Know what’s connected

Know which devices are home, and which are new.

Keep the device list about what is really in your home.

Offline and back-online alerts

Watch an important device and hear when it has not been seen on the network for a while, and when it returns. You choose how long it must be missing first.

Presence history

See when a device was seen on your home network over recent days. This is network presence, not a person’s location.

New-device review

When something new joins, a review card helps you identify it before you assign it to someone or restrict it.

Rooms and archive

Label devices by room and archive old ones, so the list matches the home you have today.

Understand the signals

Notice changes worth a closer look.

Each signal says what was seen and, where it is known, on which device.

Blocked threat requests, by device

On supported setups, see which device made a request that HomeControl protection blocked as a known threat.

Unusual connection patterns

Counts of connection patterns sometimes linked to infected devices. A reason to look closer, not proof of infection. You can switch it off.

New UPnP port-mapping notices

Get notified when the router reports a new UPnP port mapping. It is not a check of what can be reached from the internet.

Security in the weekly summary

The weekly home summary now includes a short security section.

Check your exposure

Check what’s open, only when you ask.

Nothing here starts without a parent’s confirmation, and it only covers your own home network.

Local check for risky services

From a phone on your home Wi-Fi, look for commonly risky open services, such as remote desktop or file sharing, with suggested next steps. Where it can be matched safely, a result is linked to the device in your list.

Outside-in check

After you confirm, FamilyAtlas’s published checking address tries a limited list of TCP ports on your home’s public address, to see what can be reached from the internet.

Device identity read

With your permission, your phone reads a few details a device announces on your local network, such as its web server or certificate name, to help you recognise it. What it reads stays on the phone.

Known-vulnerability possible match

Compares what a device appears to be with the U.S. CISA Known Exploited Vulnerabilities catalog. A match means the device may be affected; the installed version is not confirmed.

Take practical action

Know what to do next.

Clear next steps, and alerts you control.

One security overview

One screen brings these sources together, shows the scope and time of each check, and suggests next steps such as updating firmware or closing a port.

Alerts you choose, with snooze

Turn each type of security notification on or off, and snooze one for 24 hours or 7 days.

Wake-on-LAN

Wake a supported computer on your home network from the app, when the device and its settings allow it.

See the published checking address and contact (English) ↗

What to know before you start

  • Signals are not diagnoses. A flagged device may be fine, and a quiet screen does not mean nothing is wrong.
  • No result, an old result or a check that has not run is not an all-clear. Each source shows its scope and when it last ran.
  • Checks and identity reading start only when a parent confirms them, and only on your own home network. The outside-in check covers a limited list of TCP ports only.
  • This is not antivirus, a penetration test or a guarantee. Keep devices and router firmware updated and protect accounts with strong sign-in security.
  • Some tools need a Brume 2, a phone on your home Wi-Fi or extra setup, and may not work with every device.
Check device support →
Good questions

Does HomeControl make my home safe from hacking?

No product can promise that. HomeControl helps you notice changes and check exposure on your own network. It is not antivirus, a penetration test or a guarantee.

Will FamilyAtlas scan my network without asking?

No. Local checks, the outside-in check and device identity reading start only when a parent confirms them in the app, and only for your own home network.

Is presence history a way to track people?

No. It shows when a device was seen on your home network. A phone left at home still looks present; it is not anyone’s location.

Build a routine that fits

More family time starts
with a small change.

FamilyAtlas is coming soon. Join the email list and we’ll let you know when early access opens.

Join the early-access list →